RIP Kits Archives » Agile Offroad

RIP Kit Suspension Upgrade for INEOS Grenadier by Agile Offroad

Chris Prazen — Wed, 25 Feb 2026 00:15:33 +0000

Complete Suspension Upgrade for Grenadier

RIP kit for INEOS Grenadier by Agile Offroad

The Agile Offroad RIP Kit for the INEOS Grenadier combines multiple spring configurations with your choice of FOX reservoir shocks to deliver a proper suspension lift for ideal ride height, load support, and controlled damping in one fully engineered suspension system.

The RIP Kit for the INEOS Grenadier is a configurable ride improvement package built to match how your vehicle is actually used. Whether you are running a lightly equipped daily driver or a fully outfitted overland build, this system allows you to select the correct spring rate and shock package for your specific weight and terrain demands.

Choose from Agile Offroad lift springs or rear spring options rated for 500 lb. or 1000 lb. of added constant rear weight. Pair your spring configuration with either FOX 2.0 reservoir shocks or FOX 2.5 reservoir shocks with DSC EVO compression control. The result is improved ride height of 1.5″ to 1.75″, controlled body motion, consistent damping performance, and long-term durability on and off road.

Benefits

Correct spring rate for your build
Improved ride control and stability
Reduced shock fade under load
Confident on and off-road handling

Key Features

Three rear spring configurations available
Agile Offroad lift springs
Eibach 500 lb. constant load rear spring option
Eibach 1000 lb. constant load rear spring option
FOX 2.0 reservoir shock option
FOX 2.5 reservoir with DSC EVO option
Approximately 1.5 to 1.75 in lift
Fully integrated suspension package

Spring options built around your weight

Match the suspension to your build

The RIP Kit offers three rear spring configurations. The standard Agile Offroad spring setup delivers balanced lift and comfort for stock or lightly equipped vehicles. For builds carrying constant rear weight, optional 500 lb. and 1000 lb. rear spring packages are available to properly support added gear, bumpers, racks, water systems, or expedition equipment.

Important: The 500 lb. and 1000 lb. rear spring options are intended only for vehicles that permanently carry that additional weight. Selecting a higher load spring without the matching weight will result in a firm ride and potential drivetrain complications.

Agile Offroad lift springs

Balanced lift and control

The standard configuration utilizes a 185 lb. single-rate front spring and a dual-rate rear spring to improve stance and suspension balance. This setup provides approximately 1.5 to 1.75 in of lift depending on vehicle load while maintaining controlled ride quality and predictable handling.

FOX 2.0 reservoir option

Reliable performance and cooling

The FOX 2.0 reservoir shock option features an internal floating piston design and external reservoir for improved heat management and consistent damping. Ideal for daily-driven Grenadiers that still see regular trail use, this setup delivers dependable performance and enhanced ride control.

FOX 2.5 DSC EVO upgrade

Increased oil capacity and refined control

For heavier builds and more demanding terrain, the FOX 2.5 reservoir shock with DSC EVO provides increased oil capacity and superior heat dissipation. The larger shock body improves consistency under aggressive use while DSC EVO compression control allows fine tuning to match terrain and load conditions.

Engineered as a complete system

Lift, control, and geometry working together

The RIP Kit is designed as a cohesive suspension system. Springs and shocks are selected to complement each other, improving stability, reducing body motion, and maintaining predictable handling. The result is a Grenadier that remains composed on pavement and controlled when the terrain becomes technical.

Specifications

Front spring rate: 185 lb.
Rear spring options: Agile dual-rate, Eibach 500 lb. constant added rear weight, Eibach 1000 lb. constant added rear weight
Lift range: Approximately 1.5 to 1.75 in depending on vehicle weight
Shock options: FOX 2.0 reservoir or FOX 2.5 reservoir with DSC EVO
Fitment: INEOS Grenadier

The post RIP Kit Suspension Upgrade for INEOS Grenadier by Agile Offroad appeared first on Agile Offroad.

Factory Race RIP Kit for Sprinter 3500 4WD/AWD by Agile Offroad

Chris Prazen — Tue, 28 Oct 2025 23:01:22 +0000

Unmatched Control with FOX Factory Race Internal Bypass

3500 4WD/AWD 2.5 Factory Race Series RIP Kit by Agile Offroad

Agile Offroad’s 2.5 Factory Race RIP Kit for the 4WD/AWD Sprinter 3500 takes suspension performance to the next level with FOX’s new Internal Bypass technology. Tuned specifically for the heavier 3500 chassis, this system delivers refined comfort, greater damping control, and superior composure across any terrain.

Built for Sprinter 3500 owners who demand professional-grade performance, Agile’s Factory Race RIP Kit is centered around the latest FOX 2.5 Factory Race Series shocks featuring internal bypass damping. This advanced, position-sensitive design provides plush compliance over small bumps while firming up under load or during full compression, maximizing both comfort and control. Paired with Agile-tuned coilovers, progressive rear leaf springs, and a precise bolt-on installation, this system transforms your Sprinter into a smooth, stable, and capable machine ready for anything from desert tracks to cross-country highway runs.

Internal bypass technology delivers position-sensitive control

Tuned for heavier 3500 chassis weight and load capacity

Excellent heat dissipation for fade-free performance

Balanced ride height and lifted stance

Fully bolt-on installation, no fabrication required

Precision Ride Control

FOX 2.5 Factory Race Internal Bypass Shocks

FOX’s new Internal Bypass design separates damping zones within the shock body to deliver a supple ride through mild terrain and firmer resistance at full compression. The result is greater stability, enhanced traction, and smooth transitions across uneven surfaces, ideal for fully loaded 3500 Sprinters tackling varied terrain.

Performance Under Heavy Loads

High-capacity aluminum shock bodies with external reservoirs

Engineered for endurance, FOX’s aluminum-bodied Factory Race shocks excel under sustained load and extended use. External reservoirs and advanced heat management technology ensure consistent damping even on long-distance or high-speed runs, giving your Sprinter unmatched control and durability when fully outfitted or towing.

Custom Valving for the 3500 Chassis

Co-developed by FOX and Agile Offroad

Every Factory Race shock and strut is tailored specifically to the 3500 Sprinter platform. Agile and FOX engineers worked side-by-side to refine valving for heavy-duty applications, delivering stable handling, minimized body roll, and a planted feel that inspires driver confidence in all conditions.

Auxiliary Shock Options

Add Performance or Race Series front bypass packages

Choose from two front auxiliary shock packages to expand your tuning range. The FOX 2.0 Performance Series offers all-around off-road control, while the Factory Race Series External Bypass option provides fully adjustable, race-level performance with precise tuning and maximum cooling capacity for sustained rough terrain use.

System Proven by Experience

Designed, tested, and proven as a complete system

This RIP Kit integrates every component into a cohesive suspension system. The combination of Factory Race shocks, Agile-tuned springs, and precision hardware ensures balanced handling, superior comfort, and exceptional off-road capability, built to withstand the demands of fully loaded, long-haul travel.

Specifications

Vehicle Fitment: Mercedes-Benz Sprinter 3500 4WD/AWD (2015+)
Front Shock Type: FOX 2.5 Factory Race Coilover Strut
Rear Shock Type: FOX 2.5 Factory Race Internal Bypass Reservoir Shock
Adjustability: High- and Low-Speed Compression (DSC EVO)
Rear Leaf Spring Options: 5500, 6000, 6500, or 7500 lb
Installation: 100% Bolt-on, No Fabrication Required
Optional Upgrade: Front Auxiliary Shock Packages

The post Factory Race RIP Kit for Sprinter 3500 4WD/AWD by Agile Offroad appeared first on Agile Offroad.

Factory Race RIP Kit for Sprinter 2500 4WD/AWD by Agile Offroad

Chris Prazen — Tue, 28 Oct 2025 19:01:24 +0000

Race-Ready Control with FOX Factory Race Suspension

2500 4WD/AWD 2.5 Factory Race RIP Kit by Agile Offroad

Experience next-level suspension performance with Agile’s 2.5 Factory Race RIP Kit for 4WD/AWD Sprinter 2500. Built around FOX’s latest Internal Bypass technology, this system delivers maximum control, comfort, and durability on and off the pavement, purpose-built for serious overlanders and high-mileage adventurers.

Agile Offroad’s Factory Race RIP Kit redefines what’s possible for Sprinter suspension. Centered on the all-new FOX 2.5 Factory Race Series shocks with internal bypass damping, this kit provides advanced control through position-sensitive tuning, offering plush ride quality over small bumps and firm, predictable handling under heavy load or at full compression. Each shock is co-developed by FOX and Agile for the Sprinter platform, ensuring unmatched balance between comfort and capability. With tuned front coilovers, progressive rear leaf springs, and bolt-on installation, this is the ultimate upgrade for those who demand both refinement and race-level performance.

Internal bypass technology delivers position-sensitive control

Tuned ride comfort with increased control and composure

Superior heat management and fade resistance

Balanced geometry for lifted stance and handling stability

100% bolt-on design, no fabrication required

Precision Control with Internal Bypass Damping

Factory Race Internal Bypass Shocks

The heart of this RIP Kit is the FOX 2.5 Factory Race Series shock system featuring internal bypass technology. This advanced design allows separate damping zones within the shock body, delivering soft initial response over chatter and firm resistance at bottom-out. The result: unmatched composure and predictability across any terrain, from washboard roads to high-speed desert tracks.

Engineered for Heat Dissipation & Durability

High-capacity aluminum shock bodies with external reservoirs

Built to perform under the toughest conditions, FOX’s aluminum-bodied Factory Race shocks dissipate heat faster than steel and maintain consistent damping during long runs. External reservoirs and Velocity Valve Control (VVC) provide maximum performance under load, ideal for heavy vans tackling long-distance expeditions or technical trails.

Custom-Tuned Suspension for Sprinter Weight & Dynamics

Co-developed by FOX and Agile Offroad

Each component is precision-tuned for Sprinter chassis geometry and weight distribution. Agile’s exclusive valving delivers a firm, planted feel at speed and a supple ride at low velocity, perfect for overland builds, loaded adventure rigs, or high-roof configurations that demand confidence and comfort.

Upgrade Your Front End with Auxiliary Shock Options

Add Performance or Race Series front bypass upgrades

Customize your ride with optional auxiliary shock packages. Choose FOX 2.0 Performance Series for balanced everyday control or FOX Factory Race External Bypass shocks for ultimate off-road precision, increased cooling, and expanded tuning range, purpose-built for high-speed off-road conditions.

Integrated System, Proven by Experience

Tuned, tested, and refined for cohesive performance

Every component in this RIP Kit, from the internal bypass shocks to the Agile-tuned leaf springs, has been tested extensively to ensure cohesive system performance. The result is a well-balanced suspension that enhances stability, handling, and ride quality whether you’re cruising the highway or exploring rough backroads.

Specifications

Vehicle Fitment: Mercedes-Benz Sprinter 2500 4WD/AWD (2015+)
Front Shock Type: FOX 2.5 Factory Race Internal Bypass Coilover Strut
Rear Shock Type: FOX 2.5 Factory Race Internal Bypass Reservoir Shock
Adjustability: High- and Low-Speed Compression (DSC EVO)
Rear Leaf Spring Options: 4200, 4200 with 1” Lift, 4700, 5400, or 6000 lb
Installation: 100% Bolt-on, No Fabrication Required
Optional Upgrade: Front Auxiliary Shock Packages

The post Factory Race RIP Kit for Sprinter 2500 4WD/AWD by Agile Offroad appeared first on Agile Offroad.

2.5 Performance Elite RIP Kit for Sprinter 3500 4WD/AWD by Agile Offroad

Chris Prazen — Wed, 02 Jul 2025 18:53:45 +0000

Maximum Performance. Maximum Control.

Built for Adventure: Superior Ride Quality On & Off Road

Engineered for adventurers who refuse to compromise, this premium suspension upgrade is built to conquer rugged trails, highway miles, and everything in between. Thanks to precision-tuned 2.5-inch Fox Performance Elite shocks and custom rear leaf springs, this kit delivers unmatched stability, comfort, and control even when fully loaded.

Heavy build? No problem. This RIP Kit is tailored specifically to the demands of high-roof Sprinters & Class-C RVs loaded with gear, mods, and upgrades. The rear suspension system is optimized to reduce rear-end sag, stabilize sway, and preserve the van’s factory geometry—ensuring your van remains balanced and capable under full load.

Not all suspension kits are created equal. This Agile Offroad-exclusive RIP Kit is meticulously engineered to integrate seamlessly with the Mercedes-Benz 3500 4WD/AWD Sprinter chassis. It maintains factory alignment specs and ensures proper travel and articulation for consistent performance in real-world conditions.

This kit contains heavy, oversized components and ships via freight. A team member will reach out before shipping to coordinate delivery.

Application specific tuning

Consistent dampening under load

Larger digressive pistons resist fade and overheating

Adjustable compression for customized performance

FOX 2.5 Shocks with DSC EVO Adjusters

Adjustable high- & low-speed compression

Built around massive 2.5” diameter FOX Performance Elite shocks, this system offers superior damping, more control, and dual-speed compression tuning so you can dial in your ride for rough trails, gravel roads, or highway cruising.

Progressive Leaf Springs with Proper Geometry

Choose from four spring rates

Our custom-tuned leaf springs restore ride height and optimize load support. They maintain correct geometry and shock angles for long-term performance.

Proven Performance, Tuned by the Experts

Off-road tested, Sprinter-specific calibration

Every RIP Kit is the result of years of off-road testing and real-world refinement by Agile’s suspension team. Tuned specifically for the Sprinter chassis, these bolt-on upgrades strike the perfect balance of comfort, control, and capability—no fabrication, no guesswork, just performance you can trust.

Upgrade with Optional Auxiliary Shocks

Choose from Standard or Factory Race Series bypass

Add serious front-end control with your choice of auxiliary shock upgrade. Stick with the 2.0 Performance Series for everyday off-road handling or step up to the Factory Race Series External Bypass shocks, built by Fox Motorsports for high-speed terrain response, full adjustability, and maximum cooling. Each option integrates with Agile’s front auxiliary bracket system for a trail-ready fit.

AO Fox 2.0 Auxiliary Front Shocks and mount kit will NOT fit vans with Mercedes-Benz factory rear mounted AC unit.

Proven System, Engineered to Work Together

Tuned components tested for total system performance

This RIP Kit isn’t just a collection of upgrades, it’s a fully integrated suspension system refined through years of real-world testing. FOX struts and shocks, as well as Agile-tuned leaf springs all work in unison to deliver balanced performance, load control, and durability you can rely on wherever you roam.

Specifications

Vehicle Fitment: Mercedes-Benz Sprinter 3500 4WD/AWD
Leaf Springs Options: 5500, 6000, 6500, or 7500
Wheel Spacer Kit: Aftermarket Alloy 16mm, Aftermarket Alloy 20mm, Factory Alloy 16mm, Factory Steel 16mm, or Factory Steel 20mm
Auxiliary Shock Kit: None, 2.0 Performance (Standard), or Race Series External Bypass (Bypass)

Included in all configurations (regardless of auxiliary shock selection):
Fox Performance Elite Struts with Coil Springs
Fox Performance Elite Rear Shocks
Leaf Springs (selectable rate)
1-3/8" Lift Block Leveling Kit
U-Bolt Kit
Leaf Spring Nuts (x2)
Leaf Spring Bolts (x2)

The post 2.5 Performance Elite RIP Kit for Sprinter 3500 4WD/AWD by Agile Offroad appeared first on Agile Offroad.

2.5 Performance Elite RIP Kit for Sprinter 2500 4WD/AWD by Agile Offroad

Chris Prazen — Wed, 02 Jul 2025 17:56:30 +0000

Sprinter Performance & Control Elevated

The 2500 4WD/AWD 2.5 Performance Elite RIP Kit by Agile Offroad

Engineered for demanding off-road conditions, Agile’s Performance Elite RIP Kit for 4WD/AWD Sprinter 2500s delivers serious suspension upgrades including 2.5” adjustable FOX shocks, tuned coils, and progressive leaf springs.

Agile Offroad’s Performance Elite RIP Kit is the ultimate suspension solution for 4WD, and AWD Sprinter 2500 vans built for serious off-road adventure, and on road performance. Centered around Fox’s 2.5 Performance Elite Series shocks and struts with DSC adjusters, this kit offers precision handling, improved ride quality, and long-lasting durability across a wide range of conditions.

Whether you’re navigating backcountry terrain or loaded down for extended travel, the Performance Elite RIP Kit is engineered to enhance comfort, stability, and control. It comes with a matched front coilover setup and robust rear upgrades to handle added weight and rough terrain with confidence. Optional front auxiliary shock packages let you tailor the system even further to your driving needs, from weekend explorers to full-time overlanders.

This kit contains heavy, oversized components and ships via freight. A team member will reach out before shipping to coordinate delivery.

Application specific tuning

Consistent dampening under load

Larger digressive pistons resist fade and overheating

Adjustable compression for customized performance

Built for bolt-on installation

Precision Compression Control at All Four Corners

Dual Speed Compression adjusters on struts and shocks

FOX 2.5 Performance Elite dampers come equipped with Dual Speed Compression (DSC EVO) adjusters, allowing independent high- and low-speed tuning. Whether you're carving pavement, crawling rocks, or loaded with gear, this adjustability gives you full control over ride quality and responsiveness.

Heavy-Duty FOX 2.5 Platform for Demanding Terrain

Large-diameter shock bodies with reservoirs

The heart of this RIP Kit is FOX’s proven 2.5-inch Performance Elite platform, featuring oversized shock bodies and remote reservoirs. With increased oil capacity and improved heat dissipation, these dampers are built to handle long-distance overlanding, washboard trails, and rugged backcountry use.

Tailored Digressive Valving for Sprinter Vans

Custom-calibrated by FOX and Agile Offroad

Each shock and strut is tuned using Sprinter-specific digressive valving, co-developed by FOX and Agile Offroad. This valving delivers a firm, planted feel under load while maintaining excellent small-bump compliance and chassis control, ideal for high-roof vans with shifting payloads and dynamic road conditions.

Upgrade Your Front End with Optional Aux Shocks

Add Performance or Race Series auxiliary options

Level up your suspension with Agile’s front auxiliary shock upgrade. Choose FOX 2.0 Performance Series for general off-road control or go all in with Factory Race Series external auxiliary shocks for extreme damping performance, fine-tune adjustability, and superior cooling in high-speed off-road environments.

Proven System, Engineered to Work Together

Tuned components tested for total system performance

Specifications

Vehicle Fitment: Mercedes-Benz Sprinter 2500 4WD AWD (2015+)
Front Shock Type: FOX 2.5 Performance Elite Coilover Strut
Rear Shock Type: FOX 2.5 Performance Elite Reservoir Shock
Adjustability: High- and Low-Speed Compression (DSC EVO)
Rear Leaf Spring Options: 4200, 4200 with 1” Lift, 4700, 5400, or 6000 lb
Installation: Bolt-on, no fabrication required
Optional Upgrade: Front Auxiliary Shock Packages

The post 2.5 Performance Elite RIP Kit for Sprinter 2500 4WD/AWD by Agile Offroad appeared first on Agile Offroad.